Application case: Replacement for the traditional T8 lamp with inductance starter,can not replace the T8 CFL with electronic starter Specification: *Input voltage is AC198-242 or AC105-140V *style of LED:1W LED *operating temperature:-40℃ to 80℃ *Life time:30 Kh *Indoor use only *Do not touch bulbs when power is on Description: Use 1W LED as lighting source,high illumination efficiency. Uses aluminuim housing as light material,easily cooling and anode of surface deal with oxidation.smooth and glossy surface. built with dedicated LED driver with PWM constant supply to ensure longer operating life and to minimize brightness deterioration due to over -driven. ﹡CE certification & ROHS compliance USER’S MANUAL: User should read the manual before using this high power T8 tube light, other wise it will niduce short circuit,lelctric shock or fire. 1.Electronic ballast must be removed before installed on a fixture with a ballast, connect the line,see Picture(1).And Check the power supply,voltage before using. 2.The starter(S)must be removed before installed on a fixture with inductance ballast. See picture(2),and Check the power supply voltage before using. False False Bitmap
PICTURE(2) Remark:Please pull out(S){starter}before install T8 tube light on the fixture, or will induce short circuit or be dangerous.
Copyright 2004~2010 Sansen Technology Co.,Ltd.All Right Reserved
Address: Room 5F, Block 3, DiJingFeng, DaFen Village, BuJi Town, Shenzhen City,
Guangdong, P.R.China Post Code: 518112
Tel: +86-755-28726625 Fax: +86-755-28732286 MSN: Sansentech@hotmail.com Email: info@ledmfg.cn, info@sansentech.com